CO2 Monitor for Schools & Offices : Hard-Wired

175.00 excl. VAT

Description

Envirosafe Ireland offer a hard-wired CO2 Monitor for schools looking at re-opening safely during the Covid-19 crisis.
Many schools are monitoring CO2 as an indication of deteriorating air quality/poor ventilation.
Elevated CO2 levels (caused by people exhaling) are taken as a cue to ventilate the room, by opening windows. If the room is well ventilated, spread of Covid-19 will be reduced.

Outdoor air contains approximately 400 ppm. Breathing generates CO2, so the indoor CO2 concentration will always be at least 400 ppm and usually higher.
An indoor CO2 level of 1150 ppm provides adequate air quality and 1600 ppm indicates poor air quality. 800 or 1000ppm is recommended as the point to increase ventilation.

The CO2M Carbon Dioxide Monitor provides a bold visual indication using a traffic light LCD, as well as having a digital readout to display the current levels/concentrations

With a built-in mains rated volt free contact, the unit can be easily interfaced with Ventilation and Window Control Systems, as well as Gas Safety Systems. Or it can simply be used as a traffic light indicator to advise further ventilation is required.

The unit offer four pre-set programs, two aimed at ventilation and two aimed at gas safety. These affect the traffic light and relay setpoints.

 

CO2 Monitor Key Features

 

• 100-240V AC Power Supply
• Back plate can be pre-wired
• Clear digital readout
• Bold Traffic Light Indication
• Mains rated volt free contact output
• Typical 10 year life expectancy
• Self-calibrating CO2 sensor
• Mounts on standard single gang junction / conduit box

 

CO2 Monitor Options

 

CO2M : CO2 Monitor
CO2M-H : CO2,Teperature and Relative Humidity Monitor

 

CO2 Monitor Technical Specifications

 

Power Supply100-240VAC 50/60Hz
Power Consumption3W Max
CO2 Range0 – 10,000ppm
CO2 Accuracy±40 ppm +3% @ NTP
CO2 Display Resolution1ppm
CO2 Sensing MethodNon Dispersive Infra-red (NDIR)
Temp Range0 – 50°C
Temp Accuracy±0.3°C @ 25°C
Temp Display Resolution0.1°C
RH Range0 – 100%
RH Accuracy±2% @ 20 – 80%
RH Display Resolution VFC0.10%
Operating ConditionsTemp : 0°C to 50°C
Humidity: 0 to 95% (NC)
Sensing MethodSolid State NDIR
Typical Sensor Life Sampling Method10 Years
IP RatingIP40
Housing MaterialFlame Retardant ABS
ApprovalCE